|
Product Details:
|
| Application: | Steel Structure Aircraft Hangar,Aircraft Hangar Construction | Type: | Steel Structure Hangar |
|---|---|---|---|
| Raw Steel Material: | Q235B, Q355B, ASTM A36 | Surface Treatment: | Painting Or Hot-dip Galvanize |
| Service Life: | 50 Years | Wall And Roof: | Steel Cladding/Rock Wool/Glass Wool/EPS/PU Sandwich Panel |
| Columns And Beam: | H Section Column&Beam | Installation: | Engineer Guidance On Site |
| High Light: | aircraft hangar construction,prefabricated aircraft hangars |
||
Large Space Steel Structure Aircraft Hangar Construction Steel Frame Fabrication
This is aLarge Space Steel Structure Aircraft Hangar Construction Steel Frame Fabrication. Due to the large span of the hangar, the structural weight (mainly the roof system) also accounts for a large proportion of the total load, so modern hangars are usually designed as steel space structures.
Space structure system is well stressed and light in weight, and can solve problems that cannot be solved by some planar structural systems. Space structures such as shell structures, grid structures, and suspension structures have been widely used as roof systems for large-span buildings.
| Name |
Large Space Steel Structure Aircraft Hangar Construction Steel Frame Fabrication |
| Structure Type | portal frame structure, truss frame, flat frame structure |
| Length | 20m~200m |
| Width | 20m~50m |
| Eave Height | 8m~30m |
| Roof Slope | 10% or flat |
| Steel beam & Column | H-section steel, truss steel, steel tube, latticed steel, cross-section steel |
| Roof & Wall insulation panel |
steel galvanized cladding sheet, composite panel |
| Door | Sliding door, folding door, lift door |
| Window | PVC fixed window and sliding door |
| Anti-corrosion for steel structure | Painting or Hot dip galvanized |
We have three production lines for steel structure fabrication, in order to serve better for abroad project, we buy some advanced machine in our production line, such as the plasma cutting machine.
1. Structural steel fabrication, painting , galvanizing , pre-assembly
2. Designing, fabrication and installation for Prefabricated steel structure building.
3. Deepen or design the fabrication drawing or shop drawing based on your architectural drawing and construction drawing
4. Engineering consulting service
All the structure components, panels,bolts and sort of accessories will bewell packed with standard package suitable ocean transportation and loaded into 40’HQ.
Just feel free to fill the form based on what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting height _____m |
Contact Person: steven
Tel: 0086-18661691560
