|
Product Details:
|
| Features: | Steel Frame Workshop Construction | Application: | Heavy Duty Steel Structure Workshop With Overhead Crane |
|---|---|---|---|
| Type: | Steel Structure Workshop | Raw Steel Material: | Q235B, Q355B |
| Surface Treatment: | Painting Or Hot-dip Galvanize | Service Life: | 50 Years |
| Wall And Roof: | EPS Sandwich Panel | Columns And Beam: | H Section Column&Beam |
| Highlight: | prefab steel buildings,steel structure factory building |
||
Heavy Duty Steel Structure Workshop With Overhead Crane / Steel Frame Workshop Construction
Heavy Duty Steel Structure Workshop With Overhead Crane / Steel Frame Workshop Construction. This steel structure workshop is used as a heavy engineering machine workshop. Large steel beams and columns is used to be the main steel structure frame. It has 6 of 20 Tons electric single girder cranes in the workshop to lift heavy machine and parts. Main steel structure quantity is about 950 Tons. Our service scope for this project include designing all the drawings, fabrication for steel structure, installation for steel structure, roof and wall panels, crane. We make the independent production schedule to each project. Our engineers will introduce and train workers for each project before fabrication works start.
New workshop with covered area of 13,500m².
| Name | steel structure workshop with crane |
| Structure Type | 3 spans, single ridge |
| Length | 150m |
| Width | 90m |
| Eave Height | 11m |
| Roof Slope1 | 10% |
| Gable Wall Column Spacing | 7.5m |
| Roof |
75mm EPS sandwich panel |
| Wall | 75mm EPS sandwich panel |
| Door | Sliding door |
| Window | Ribbon Skylight |
| Height difference between indoor and outdoor | 300mm |
| Main steel frame | H-section steel | Q345 steel 8mm to 10mm | |
| Welding | Automatic Submerged Arc Welding | ||
| Rust removing | Sand blasting | ||
| surface processing | Alkyd Paint or galvanized | ||
| High strength bolt | Grade 10.9 | ||
| Supporting system | Angle brace | L50x4,Steel Q235,Process and painting | |
| Cross bracing | dia.20 round bar,Steel Q235, process and painting | ||
| Tie bar | dia.89*3 round pipe,Steel Q235 Process and painting | ||
| Batter brace | dia.12 round bar,Steel Q235 process and painting | ||
| Ordinary bolt | Galvanized bolt | ||
| Roof | Purlin | C160*60*2.5,steel Q235,Painting or galvanized | |
| Out-roof panel | Sandwich panel or corrugated steel plate | ||
| Transparent skylight | 6mm thick PVC | ||
| Accessories | Sealant,self-tapping screw, etc. | ||
| Edge cover | Made of color steel sheet thickness 0.5mm | ||
| Gutter | Made of steel sheet thickness 0.8mm, or PVC | ||
| Rinspout | dia.110 PVC | ||
| Wall | Purlin | C160*60*2.5,steel Q235,paint | |
| Wall panel | Sandwich panel or corrugated steel plate | ||
| Accessories | Sealant,self-tapping screw etc | ||
| Edge cover | Made of color steel sheet thickness 0.5mm | ||
| Ventilator | unpowered axial-flow ventilator or monitor roof | ||
| Door & window | Rolling door/sliding door, PVC/alu. alloy window | ||
| Crane | With or without crane, ranging from 5 tons to 20 tons |
We will design installation drawing for each project, we could also install it as you need.
Just feel free to fill the form based on what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting height _____m |
Contact Person: steven
Tel: 0086-18661691560
