|Features:||Steel Frame Structure Building||Application:||Heavy Industrial Steel Buildings|
|Type:||Industrial Steel Buildings||Raw Steel Material:||Q235B, Q355B, ASTM A36,|
|Surface Treatment:||Painting Or Hot-dip Galvanize||Service Life:||50 Years|
|Columns And Beam:||H Section Column&Beam||Installation:||Engineer Guidance On Site|
SGS Heavy Industrial Steel Buildings,
Prefabricated Industrial Steel Buildings,
Prefabricated Steel Power Plants
Heavy Industrial Steel Buildings/Prefabricated Steel Power Plants
Heavy Industrial Steel Buildings/Prefabricated Steel Power Plants. We design the 3D model for the steel frame structure of the building. Then we fabricate the steel components about 600 tons and install it together with the General contractor.
For such project, we also design the 3D Tekla model for our client. The paint thickness of such project is also very thick, we have indoor painting room to solve it.
(1) Strong shock resistance. Because the materials used in the construction of steel structures are mainly metal materials, and the steel used has great advantages in tensile and compressive strength. Because steel structure has vibration delay performance, it has good advantages in seismic performance. The appearance of steel structure has greatly improved the level of earthquake resistance in my country.
(2) The construction speed is fast. In the construction of steel structures, the construction speed is very fast, and the construction period is relatively short, which is very beneficial for those processes with tight construction periods. This greatly increases the speed of construction because the steel structure is completed in the fabrication plant. The overlap between the equipment, the roof panel and the lighting panel, strengthen the overlap between the ventilation equipment.
(3) Save space. In the construction of steel structures, scientific design can be used to ensure that there are no columns inside the building, and in this way, a wider space can be provided for the interior of the construction project, which is more conducive to the full arrangement of the interior of the building. In the construction of steel structure, because it has a lot of lines or pipelines, it can save some space to the maximum extent, and it is very convenient for the renovation of lines and pipelines.
(4) High heat resistance, poor fire resistance and poor corrosion resistance. Compared with other buildings, because the steel used in the construction of steel structures can withstand a high temperature of 200 degrees Celsius, if the temperature reaches above 200 degrees Celsius, the performance of the steel will be lower, which leads to the heat resistance of the steel structure. Relatively strong, but also relatively poor in fire resistance. Therefore, it is necessary to take effective measures to prevent this characteristic of the steel structure, such as using some refractory materials to make a thermal insulation layer to better improve the fire resistance of the steel structure. In addition, because the main material of the steel structure is steel, because the corrosion resistance of steel is relatively poor, the overall corrosion resistance of the steel structure is also relatively poor. In the design process, the use type and geographical location of the plant should be fully considered. Appropriate anti-corrosion measures and processes shall be adopted according to the local weather conditions.
We have a dedicated steel structure engineering design department and research and development department, and established an independent and complete steel structure engineering design, optimization and deepening design system. Establishing engineering materials than building materials, we not only control the reliability and economy of the structure, but also the categories, performance, selection and combination of traditional enclosing materials and new maintenance materials. Our design is not only more applicable, safer, more economical, but also rich in architectural beauty.
|Main Steel Frame Structure|
|Main structure||H section steel Q345, alkyd painting, two primary painting, two finish painting.|
|Intensive bolt||Grade 10.9|
|Turn buckle bolt||M20+2, steel Q235, processing|
|Anchor bolt||M24, steel Q235, processing|
|Ordinary bolt||Galvanized bolt M20|
|Ordinary bolt||Galvanized bolt M12|
|Batter brace||Φ32*2.5, Φ12 round steel bar Q235, process and painted (alkyd painting)|
|Fittings & accessories||Nails, glue etc.|
All the structure components, panels,bolts and sort of accessories will bewell packed with standard package suitable ocean transportation and loaded into 40’HQ.
|1||Professional design team||We could design the drawing as your requirement or calculate the steel quantity based on your drawing.|
|2||Skilled fabrication team and advanced equipment||We make the independent production schedule to each project. Our engineers will introduce and train workers for each project before fabrication works start.|
|3||One-stop service||Nearly each steel structure project is customized by our clinets’ requirement. We have completed lots such kinds of projects, we could provide the integrated proposal for your project.|
|4||Professional QC team||Professional QC team will guarantee that we will provide the production and service as your request.|
|5||After sales service||If it has any questions that need us to do in your process of using, such as the maintain of outside insulation and steel components, just tell us , we will try to provide the service as well as we can.|
Contact Person: steven