|
Product Details:
|
| Features: | Steel Structure Workshop | Application: | Steel Structure Workshop, Warehouse, Industrial Building |
|---|---|---|---|
| Service: | Design,Fabrication, Installation | Raw Steel Material: | Q235B, Q355B, ASTM A36, |
| Surface Treatment: | Painting Or Hot-dip Galvanize | Service Life: | 50 Years |
| Wall And Roof: | Glass Wool Sandwich Panel | Columns And Beam: | H Section Column&Beam, Latticed Column |
| High Light: | prefab steel buildings,metal workshop building |
||
Industrial Steel Building Construction / Prefab Steel Building Frame Workshop
| Name |
Industrial Steel Building Construction / Prefab Steel Building Frame Workshop |
| Structure Type | Portal frame, single ridge, three span |
| Length | 240m |
| Width | 150m |
| Eave Height | 10m |
| span | 50 m for each span |
| Steel structure quantity | 2200 Ton |
| Column&Beam | H-section steel, latticed column, honeycomb beam, truss beam |
| Roof & Wall sandwich panel |
75mm Glass wool sandwich panel |
| Door | Sliding door |
| Window | Ribbon Skylight |
| Steel Frame | H section steel | Q235/Q345 steel 8mm/10mm |
| Welding | Automatic submerged arc welding | |
| Rust removal | Sand blasting | |
| Surface finish | Alkyd paint or galvanized | |
| Intensive bolt | M20,Grade 10.9 | |
| Supporting System | Angle brace | L50x4,Steel Q235, processed and painted |
| Horizontal brace | Φ20, Steel Q235, processed and painted | |
| Column brance | Φ20, Steel Q235, processed and painted | |
| Tie rod | Φ89*3, Steel Q235, processed and painted | |
| Ordinary bolt | M12 Galvanized bolt | |
| Roof | Purlin | C160*60*2.5,Steel Q235, galvanized and painted |
| Roof panel | 75mm Glass wool sandwich panel | |
| Sky light | 6mm thick PVC | |
| Accessories | Glass cement, self-tapping screws, etc. | |
| Edge cover | 0.4mm steel sheet profile trimming | |
| Gutter | 0.4mm thick sheet steel profile or galvanized sheet | |
| Down pie | Φ110PVC | |
| Walls | Purlin | C160*60*2.5,Steel Q235, painted |
| Wall | 75mm Glass wool sandwich panel | |
| Accessories | Glass cement, self-tapping screws, etc. | |
| Edge cover | 0.4mm steel sheet profile trimming | |
| Ventilation | Ventilation ball | |
| Doors & windows | Rolling door/sliding door PVC/alu/steel/window |
| 1 | High strength and light weight | Although the density of steel is larger than that of other building materials, its strength is very high. Under the same force, the steel structure has a small weight and can be made into a structure with a large span. |
| 2 | Good plasticity and good toughness | The plasticity of the steel is good, and the structure will not suddenly break due to accidental overload or partial overload. The toughness of the steel is good, making the structure more adaptable to dynamic loads. |
| 3 | High degree of industrialization in production | The steel structure is mainly produced in a specialized metal structure factory, so the production is simple and the precision is high. |
| 4 | Simple construction and short construction period | All components are prefabricated at the factory, and the site is simply assembled, which greatly shortens the construction period. |
| 5 | Wind resistance and structural stability | Steel structure construction with light weight, high strength, good overall rigidity and strong deformation ability |
| 6 | Saving construction costs | The steel structure has light weight, reduces the basic cost, and has a fast construction speed. It can be completed and put into operation as soon as possible, and the comprehensive economic benefits are much better than the concrete structure. |
| 7 | Recyclable | Steel can be recycled, less environmentally polluted when constructed and removed |
We could design the drawing as your requirement or calculate the steel quantity based on your drawing. For steel structure for a heavy industrial building, generally a full set of architectural drawing is enough. The drawing should contain architectural layout of the building with details of layout of load and locations of openings on floors. With that information we can make the structural design and calculate the costs. If the information is not available, we can help to find some authorized design institutes to make the industrial design, at your cost.
The floor space of our steel structre fabrication factory is 35,000㎡, and the workshop area is 20000㎡. We own three light/heavy H steel production lines, BOX production lines, C/Z purlin production lines and various types of profiling steel sheet machines with advanced equipment such as plasma cutting machine.
Contact Person: steven
Tel: 0086-18661691560
