|Application:||Steel Workshop, Warehouse||Raw Steel Material:||Q235B, Q355B, ASTM A36|
|Shot Blasting Level:||Sa 2.5||Service Life:||50 Years|
|Wall And Roof:||Rock Wool||Surface Treatment:||Painting|
|Type:||Large Span Multi Span Steel Frame Structure||Working Scope:||Design,Fabrication, Installation|
Prefabricated Steel Structure Workshop,
Construction Steel Structure Workshop,
Prefabricated Steel Structure Buildings
Prefabricated Steel Structure Workshop Construction Steel Structure Buildings
This is a Prefabricated Steel Structure Workshop Construction Steel Structure Buildings. Welded H-section steel beams and columns are connented by high strength bolts to be the main frame structure. New-type metal composite panel is used as wall and roof insulation panel. Parapet wall was set up at end wall.
Steel structural members are manufactured in our professional processing plants with high precision and good quality. The steel structure workshop is energy-saving and environmentally friendly. Compared with the traditional masonry structure and concrete structure, the steel structure belongs to the green building structure system. The wall of the steel structure factory adopts new lightweight composite wall panels or lightweight blocks, such as high-performance NALC boards, and the floor uses composite slabs, such as profiled steel plates, to meet the requirements of building energy conservation and environmental protection. It can achieve the goal of 50% energy saving, which greatly saves energy.
|Specification||Material Parameter||Technical Treatment|
|Column||H shape steel||Q235B,Q345B||Paint or Hot dip galvanized|
|Beam||H shape,steel Truss||Q235B,Q345B||Paint or Hot dip galvanized|
|Bracing||Steel rod,Steel pipe,Angle steel||Q235B,Q345B|
|Purling||C or Z shape, purling Thickness:1.8mm~3.0mm||Q235B,Q346B||Hot dip galvanized|
|Wall and roof panel||EPS,Rock wool,Pu,Glass wool Sandwich panel or Single sheet.||Steel T=0.426~0.8mm,insulation T=50~150mm||Alu-zinc 150g, Fluorocarbon paint|
|Door||Sliding or rolling door||Steel or Aluminum sheet,T=1.0~1.5mm||Paint or Hot dip galvanized|
|Lighting panel||FRP, T=1.5mm or T=1.8mm||Coefficient of thermal expansion:2.2x10-5/cm/cm/℃||Light transmittance 85%|
|Ventilator||Turbine ventilator, and electric type||Steel,stainless steel,PC||Paint or Hot dip galvanized,304|
|Gutter||Galvanized or stainless steel plate||T=2.0mm||Hot dip galvanized,304|
|Downpipe||PVC pipe,Color steel pipe T=0.5mm||Φ110,160,200||Paint|
|Bolt||Ordinary, high strength||10.9S,4.8s||Hot dip galvanized|
|Anchor bolt||Steel rod M24,M27 M30||Q235B|
We will provide construction drawing for each project to guide installation. We will teach you the installation in our factory. We could dispatch our engineer to guide installation on site or we install it by our construction team.
All the structure components, panels,bolts and sort of accessories will bewell packed with standard package suitable ocean transportation and loaded into 40’HQ.
All the products are loaded at the loading site of our factory using crane and forklift by our skilled workers,who will prevent the goods to be damaged.
The following question we need to know before making the price. Just feel free to fill what you know.
|1||Location (where will be built?)||_____country, area|
|3||wind load (max. wind speed)||_____kn/m2, _____km/h, _____m/s|
|4||snow load (max. snow height)||_____kn/m2, _____mm|
|6||brickwall needed or not||If yes, 1.2m high or 1.5m high|
|7||thermal insulation||If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much
lower than that of the former
|8||door quantity & size||_____units, _____(width)mm*_____(height)mm|
|9||window quanity & size||_____units, _____(width)mm*_____(height)mm|
|10||crane needed or not||If yes, _____units, max. lifting weight____tons; max. lifting height _____m|
Contact Person: Clark Cui