Product Details:
|
Features: | Metal Buildings Construction | Application: | Steel Garage Workshop |
---|---|---|---|
Type: | Steel Frame Structure Buildings | Raw Steel Material: | Q235B, Q355B |
Surface Treatment: | Painting | Service Life: | 50 Years |
Wall And Roof: | Glass Wool Sandwich Panel | Working Scope: | Design,Fabrication, Installation |
High Light: | steel structure factory building,metal workshop building |
Steel Garage Workshop For Maintenance Metal Buildings Construction
This is a Steel Garage Workshop For Maintenance Metal Buildings Construction. The steel frame structure of this light metal shop buildings is welded H-section steel columns and beams that is connected by high strength bolts. Glass wool sandwich panel is used as roof and wall insulation panels. We could design it in clean span or double spans. It also has office and storage buildings inside.
Prefab steel frame structure buildings is widely used as factory, warehouse, workshops, office buildings, residence buildings, stadiums and other buildings. The building structure system is usually formed by the main framework through linking up the H beam,Column, purlin.Roof and wall using a variety of panels together with other components such as windows and doors. Prefab steel frame structure buildings has the advantages of wide span, large inside space, high strength, light weight, low cost, short construction time, good effect of insulation, good seismic performance, flexible layout,etc.
For such project, we could design it as your request or follow your design, then we fabrcicate the steel structure in our factory.
Name |
Steel Garage Workshop For Maintenance Metal Buildings Construction |
Structure Type |
Gable frame, single ridge, clean span or two spans |
Length |
40- 100m |
Width |
20-80m |
Eave Height |
6-15m |
Roof Slope |
10% |
Gable Wall Column Spacing |
7.5m |
Roof |
Glass wool sandwich panel |
Wall |
Glass wool sandwich panel |
Door |
Sliding door |
Window |
Ribbon Skylight |
Height difference between indoor and outdoor |
300mm |
Item name | Specification | Material Parameter | Technical Treatment |
Column | H-section steel | Q235B,Q345B | Paint or Hot dip galvanized |
Beam | H-section steel | Q235B,Q345B | Paint or Hot dip galvanized |
Bracing | Steel rod,Steel pipe,Angle steel | Q235B,Q345B | |
Purling | C or Z shape, purling Thickness:1.8mm~3.0mm | Q235B,Q346B | Hot dip galvanized |
Wall and roof panel | EPS,Rock wool,Pu,Glass wool Sandwich panel or Single sheet. | Steel T=0.426~0.8mm,insulation T=50~150mm | Alu-zinc 150g, Fluorocarbon paint |
Door | Sliding or rolling door | Steel or Aluminum sheet,T=1.0~1.5mm | Paint or Hot dip galvanized |
Window | alloy-Glass,Aluminium alloy-shutter | T=1.0~2.0mm | Alloy |
Lighting panel | FRP, T=1.5mm or T=1.8mm | Coefficient of thermal expansion:2.2x10-5/cm/cm/℃ | Light transmittance 85% |
Ventilator | Turbine ventilator, and electric type | Steel,stainless steel,PC | Paint or Hot dip galvanized,304 |
Gutter | Galvanized or stainless steel plate | T=2.0mm | Hot dip galvanized,304 |
Downpipe | PVC pipe,Color steel pipe T=0.5mm | Φ110,160,200 | Paint |
Bolt | Ordinary, high strength | 10.9S,4.8s | Hot dip galvanized |
Anchor bolt | Steel rod M24,M27 M30 | Q235B |
1. Structural steel fabrication, painting , galvanizing , pre-assembly
2. Designing, fabrication and installation for Prefabricated steel structure building.
3. Deepen or design the fabrication drawing or shop drawing based on your architectural drawing and construction drawing
4. Engineering consulting service
We will provide installation drawing for each project to guide installation. If you need, we could dispatch our engineer to construction site to guide installation or we install it directly.
Contact Person: steven
Tel: 0086-18661691560